UL2517
PVC izolat & jachetat 300 V 105 °C cablu de sârmă de cârlig-up
Used for computers, electrical equipment, electronic devices, instruments, and internal wiring applications.
Reference Standards: UL758, UL1581.
- Procesare rapidă a probelor cu soluții personalizate
- Materiale de înaltă calitate
- Opțiuni de preț accesibile
- Livrare globală
- Pentru o mai bună protecție a datelor, asigurați-vă că toate încărcările sunt sigure
Economisiți cel puțin 30% în medie
-
Descrierea produsului
UL2517 : Product Description and Specifications
The UL2517 is engineered specifically for instrumentation environments requiring higher thermal endurance than standard data cables. Rated for continuous operation at 105°C, it addresses the heat accumulation often found in compact control housings, medical devices, and high-density industrial panels. Unlike lower-rated alternatives, the insulation maintains its physical integrity without softening or deforming under sustained thermal stress.
Structurally, the cable utilizes a “Dual-PVC” protection system. The heat-resistant inner insulation secures the conductors, while the rugged outer PVC jacket guards against mechanical pinching and abrasion during installation. For applications requiring high signal fidelity, the optional Aluminum Foil and Tinned Copper Braid shielding creates an effective barrier against EMI, ensuring precise data transmission even in electrically noisy factory settings.
-
Avantaje
UL2517 : Benefits and Features
105°C Rating: Withstands heat accumulation in sealed enclosures where standard 80°C wire fails.
EMI Defense: Optional Foil + Braid shielding creates a Faraday cage to block industrial signal noise.
Mechanical Armor: The smooth, tough outer jacket resists abrasion and snagging during installation.
Safety Verified: Fully compliant with VW-1 flame test standards for internal fire safety.
Wide Range: Available from 30 AWG to 2 AWG for both signal and power applications.
Specification Of UL2517
| Categorie | Valoare |
|---|---|
| Application Scope | Used for internal wiring of computers, electrical appliances, electronic equipment, instruments, meters, etc. |
| Application Standards | UL758, UL1581 |
| Dirijor | Uses 30~2AWG single or stranded bare copper wire or tinned copper wire |
| Izolație | 105°C heat-resistant PVC compound |
| Core Color | Any color |
| Jacket | 105°C heat-resistant PVC compound |
| Jacket Color | Any color |
| Rated Voltage | 300V |
| Tensiune de testare | 2000V |
| Temperature Range (Fixed) | -20°C-105°C |
| Temperature Range (Mobile) | -5°C-105°C |
| Bending Radius (Fixed) | 6xD |
| Bending Radius (Mobile) | 8xD |
| Flammability Test | Passes UL VW-1 and CSA FT1 vertical flame tests |
Dimensiuni/Parametri
| Model No. | Specificație | Approx. Outer Diameter (mm) | Aprox. Greutatea cablului (kg/km) |
|---|---|---|---|
| UL2517 | 2x16AWG | 6.1 | 63.0 |
| UL2517 | 3x16AWG | 6.5 | 77.7 |
| UL2517 | 4x16AWG | 7.0 | 96.7 |
| UL2517 | 5x16AWG | 7.7 | 115.2 |
| UL2517 | 6x16AWG | 8.4 | 135.8 |
| UL2517 | 7x16AWG | 8.4 | 148.7 |
| UL2517 | 8x16AWG | 9.4 | 178.4 |
| UL2517 | 9x16AWG | 10.5 | 206.6 |
| UL2517 | 10x16AWG | 11.2 | 231.5 |
| UL2517 | 11x16AWG | 11.6 | 249.6 |
| UL2517 | 12x16AWG | 11.6 | 258.3 |
| UL2517 | 13x16AWG | 12.4 | 289.6 |
| UL2517 | 14x16AWG | 12.4 | 298.6 |
| UL2517 | 15x16AWG | 13.0 | 324.5 |
| UL2517 | 16x16AWG | 13.0 | 336.5 |
| UL2517 | 17x16AWG | 13.9 | 367.2 |
| UL2517 | 18x16AWG | 13.9 | 379.3 |
| UL2517 | 19x16AWG | 13.9 | 392.2 |
| UL2517 | 2x26AWG | 4.1 | 21.6 |
| UL2517 | 3x26AWG | 4.3 | 24.5 |
| UL2517 | 4x26AWG | 4.6 | 28.6 |
| UL2517 | 5x26AWG | 5.0 | 33.5 |
| UL2517 | 6x26AWG | 5.3 | 38.6 |
| UL2517 | 7x26AWG | 5.3 | 40.3 |
| UL2517 | 8x26AWG | 5.7 | 45.3 |
| UL2517 | 9x26AWG | 6.2 | 52.0 |
| UL2517 | 10x26AWG | 6.6 | 58.2 |
| UL2517 | 11x26AWG | 6.8 | 60.2 |
| UL2517 | 12x26AWG | 6.8 | 61.9 |
| UL2517 | 13x26AWG | 7.1 | 67.2 |
| UL2517 | 14x26AWG | 7.1 | 68.9 |
| UL2517 | 15x26AWG | 7.4 | 75.6 |
| UL2517 | 16x26AWG | 7.4 | 77.4 |
| UL2517 | 17x26AWG | 7.8 | 83.3 |
| UL2517 | 18x26AWG | 7.8 | 85.0 |
| UL2517 | 19x26AWG | 7.8 | 86.5 |
| UL2517 | 2x24AWG | 4.3 | 25.2 |
| UL2517 | 3x24AWG | 4.5 | 29.0 |
| UL2517 | 4x24AWG | 4.9 | 34.2 |
| UL2517 | 5x24AWG | 5.3 | 40.9 |
| UL2517 | 6x24AWG | 5.7 | 47.1 |
| UL2517 | 7x24AWG | 5.7 | 50.4 |
| UL2517 | 8x24AWG | 6.1 | 56.6 |
| UL2517 | 9x24AWG | 6.7 | 64.5 |
| UL2517 | 10x24AWG | 7.1 | 68.6 |
| UL2517 | 11x24AWG | 7.3 | 74.2 |
| UL2517 | 12x24AWG | 7.3 | 76.6 |
| UL2517 | 13x24AWG | 7.6 | 83.2 |
| UL2517 | 14x24AWG | 7.6 | 85.7 |
| UL2517 | 15x24AWG | 8.0 | 93.8 |
| UL2517 | 16x24AWG | 8.0 | 96.3 |
| UL2517 | 17x24AWG | 8.4 | 103.9 |
| UL2517 | 18x24AWG | 8.4 | 106.4 |
| UL2517 | 19x24AWG | 8.4 | 108.6 |
| UL2517 | 2x22AWG | 4.6 | 30.1 |
| UL2517 | 3x22AWG | 4.9 | 35.2 |
| UL2517 | 4x22AWG | 5.3 | 43.4 |
| UL2517 | 5x22AWG | 5.7 | 51.1 |
| UL2517 | 6x22AWG | 6.2 | 56.2 |
| UL2517 | 7x22AWG | 6.2 | 63.0 |
| UL2517 | 8x22AWG | 6.6 | 70.9 |
| UL2517 | 9x22AWG | 7.2 | 80.9 |
| UL2517 | 10x22AWG | 7.7 | 86.3 |
| UL2517 | 11x22AWG | 7.9 | 93.6 |
| UL2517 | 12x22AWG | 7.9 | 97.0 |
| UL2517 | 13x22AWG | 8.3 | 105.6 |
| UL2517 | 14x22AWG | 8.3 | 109.1 |
| UL2517 | 15x22AWG | 9.1 | 127.6 |
| UL2517 | 16x22AWG | 9.1 | 131.2 |
| UL2517 | 17x22AWG | 9.6 | 141.3 |
| UL2517 | 18x22AWG | 9.6 | 144.9 |
| UL2517 | 19x22AWG | 9.6 | 148.0 |
| UL2517 | 2x20AWG | 5.0 | 36.9 |
| UL2517 | 3x20AWG | 5.3 | 43.8 |
| UL2517 | 4x20AWG | 5.7 | 53.3 |
| UL2517 | 5x20AWG | 6.2 | 63.4 |
| UL2517 | 6x20AWG | 6.7 | 73.7 |
| UL2517 | 7x20AWG | 6.7 | 78.8 |
| UL2517 | 8x20AWG | 7.2 | 90.1 |
| UL2517 | 9x20AWG | 7.9 | 101.6 |
| UL2517 | 10x20AWG | 8.4 | 114.8 |
| UL2517 | 11x20AWG | 9.1 | 129.0 |
| UL2517 | 12x20AWG | 9.1 | 134.0 |
| UL2517 | 13x20AWG | 9.5 | 145.6 |
| UL2517 | 14x20AWG | 9.5 | 150.7 |
| UL2517 | 15x20AWG | 10.0 | 164.0 |
| UL2517 | 16x20AWG | 10.0 | 169.2 |
| UL2517 | 17x20AWG | 10.7 | 186.9 |
| UL2517 | 18x20AWG | 10.7 | 192.1 |
| UL2517 | 19x20AWG | 10.7 | 197.3 |
| UL2517 | 2x18AWG | 5.5 | 47.2 |
| UL2517 | 3x18AWG | 5.8 | 57.1 |
| UL2517 | 4x18AWG | 6.3 | 70.0 |
| UL2517 | 5x18AWG | 6.8 | 84.4 |
| UL2517 | 6x18AWG | 7.4 | 96.6 |
| UL2517 | 7x18AWG | 7.4 | 106.0 |
| UL2517 | 8x18AWG | 8.0 | 121.2 |
| UL2517 | 9x18AWG | 9.2 | 145.3 |
| UL2517 | 10x18AWG | 9.8 | 163.4 |
| UL2517 | 11x18AWG | 10.1 | 172.8 |
| UL2517 | 12x18AWG | 10.1 | 180.3 |
| UL2517 | 13x18AWG | 10.6 | 196.1 |
| UL2517 | 14x18AWG | 10.6 | 203.7 |
| UL2517 | 15x18AWG | 11.3 | 227.3 |
| UL2517 | 16x18AWG | 11.3 | 235.1 |
| UL2517 | 17x18AWG | 11.9 | 251.8 |
| UL2517 | 18x18AWG | 11.9 | 259.6 |
| UL2517 | 19x18AWG | 11.9 | 268.0 |
| Model | Specificație | Approx. Outer Diameter (mm) | Aprox. Greutatea cablului (kg/km) |
|---|---|---|---|
| UL2517 | 2x16AWG | 6.1 | 63.0 |
| UL2517 | 3x16AWG | 6.5 | 77.7 |
| UL2517 | 4x16AWG | 7.0 | 96.7 |
| UL2517 | 5x16AWG | 7.7 | 115.2 |
| UL2517 | 6x16AWG | 8.4 | 135.8 |
| UL2517 | 7x16AWG | 8.4 | 148.7 |
| UL2517 | 8x16AWG | 9.4 | 178.4 |
| UL2517 | 9x16AWG | 10.5 | 206.6 |
| UL2517 | 10x16AWG | 11.2 | 231.5 |
| UL2517 | 11x16AWG | 11.6 | 249.6 |
| UL2517 | 12x16AWG | 11.6 | 258.3 |
| UL2517 | 13x16AWG | 12.4 | 289.6 |
| UL2517 | 14x16AWG | 12.4 | 298.6 |
| UL2517 | 15x16AWG | 13.0 | 3245 |
| UL2517 | 16x16AWG | 13.0 | 336.5 |
| UL2517 | 17x16AWG | 13.9 | 367.2 |
| UL2517 | 18x16AWG | 13.9 | 379.3 |
| UL2517 | 19x16AWG | 13.9 | 392.2 |
| UL2517 | 11x22AWG | 7.9 | 93.6 |
| UL2517 | 12x22AWG | 7.9 | 97.0 |
| UL2517 | 13x22AWG | 8.3 | 105.6 |
| UL2517 | 14x22AWG | 8.3 | 109.1 |
| UL2517 | 15x22AWG | 9.1 | 127.6 |
| UL2517 | 16x22AWG | 9.1 | 131.2 |
| UL2517 | 17x22AWG | 9.6 | 1413 |
| UL2517 | 18x22AWG | 9.6 | 144.9 |
| UL2517 | 19x22AWG | 9.6 | 148.0 |
| UL2517 | 2x20AWG | 5.0 | 36.9 |
| UL2517 | 3x20AWG | 5.3 | 43.8 |
| UL2517 | 4x20AWG | 5.7 | 53.3 |
| UL2517 | 5x20AWG | 6.2 | 63.4 |
| UL2517 | 6x20AWG | 6.7 | 73.7 |
| UL2517 | 7x20AWG | 6.7 | 78.8 |
| UL2517 | 8x20AWG | 7.2 | 90.1 |
| UL2517 | 9x20AWG | 7.9 | 101.6 |
| UL2517 | 10x20AWG | 8.4 | 114.8 |
| UL2517 | 11x20AWG | 9.1 | 129.0 |
| UL2517 | 12x20AWG | 9.1 | 134.0 |
| UL2517 | 13x20AWG | 9.5 | 145.6 |
| UL2517 | 14x20AWG | 9.5 | 150.7 |
| UL2517 | 15x20AWG | 10.0 | 164.0 |
| UL2517 | 16x20AWG | 10.0 | 169.2 |
| UL2517 | 17x20AWG | 10.7 | 186.9 |
| UL2517 | 18x20AWG | 10.7 | 192.1 |
| UL2517 | 19x20AWG | 10.7 | 197.3 |
| UL2517 | 2x18AWG | 5.5 | 47.2 |
| UL2517 | 3x18AWG | 5.8 | 57.1 |
| UL2517 | 4x18AWG | 6.3 | 70.0 |
| UL2517 | 5x18AWG | 6.8 | 84.4 |
| UL2517 | 6x18AWG | 7.4 | 96.6 |
| UL2517 | 7x18AWG | 7.4 | 106.0 |
| UL2517 | 8x18AWG | 8.0 | 121.2 |
| UL2517 | 9x18AWG | 9.2 | 145.3 |
| UL2517 | 10x18AWG | 9.8 | 163.4 |
| UL2517 | 11x18AWG | 10.1 | 172.8 |
| UL2517 | 12x18AWG | 10.1 | 180.3 |
| UL2517 | 13x18AWG | 10.6 | 196.1 |
| UL2517 | 14x18AWG | 10.6 | 203.7 |
| UL2517 | 15x18AWG | 11.3 | 227.3 |
| UL2517 | 16x18AWG | 11.3 | 235.1 |
| UL2517 | 17x18AWG | 11.9 | 251.8 |
| UL2517 | 18x18AWG | 11.9 | 259.6 |
| UL2517 | 19x18AWG | 11.9 | 268.0 |
| UL2517 | 2x26AWG | 4.1 | 21.6 |
| UL2517 | 3x26AWG | 4.3 | 24.5 |
| UL2517 | 4x26AWG | 4.6 | 28.6 |
| UL2517 | 5x26AWG | 5.0 | 33.5 |
| UL2517 | 6x26AWG | 5.3 | 38.6 |
| UL2517 | 7x26AWG | 5.3 | 40.3 |
| UL2517 | 8x26AWG | 5.7 | 45.3 |
| UL2517 | 9x26AWG | 6.2 | 52.0 |
| UL2517 | 10x26AWG | 6.6 | 58.2 |
| UL2517 | 11x26AWG | 6.8 | 60.2 |
| UL2517 | 12x26AWG | 6.8 | 61.9 |
| UL2517 | 13x26AWG | 7.1 | 67.2 |
| UL2517 | 14x26AWG | 7.1 | 68.9 |
| UL2517 | 15x26AWG | 7.4 | 75.6 |
| UL2517 | 16x26AWG | 7.4 | 77.4 |
| UL2517 | 17x26AWG | 7.8 | 83.3 |
| UL2517 | 18x26AWG | 7.8 | 85.0 |
| UL2517 | 19x26AWG | 7.8 | 86.5 |
| UL2517 | 2x24AWG | 4.3 | 25.2 |
| UL2517 | 3x24AWG | 4.5 | 29.0 |
| UL2517 | 4x24AWG | 4.9 | 34.2 |
| UL2517 | 5x24AWG | 5.3 | 40.9 |
| UL2517 | 6x24AWG | 5.7 | 47.1 |
| UL2517 | 7x24AWG | 5.7 | 50.4 |
| UL2517 | 8x24AWG | 6.1 | 56.6 |
| UL2517 | 9x24AWG | 6.7 | 64.5 |
| UL2517 | 10x24AWG | 7.1 | 68.6 |
| UL2517 | 11x24AWG | 7.3 | 74.2 |
| UL2517 | 12x24AWG | 7.3 | 76.6 |
| UL2517 | 13x24AWG | 7.6 | 83.2 |
| UL2517 | 14x24AWG | 7.6 | 85.7 |
| UL2517 | 15x24AWG | 8.0 | 93.8 |
| UL2517 | 16x24AWG | 8.0 | 96.3 |
| UL2517 | 17x24AWG | 8.4 | 103.9 |
| UL2517 | 18x24AWG | 8.4 | 106.4 |
| UL2517 | 19x24AWG | 8.4 | 108.6 |
| UL2517 | 2x22AWG | 4.6 | 30.1 |
| UL2517 | 3x22AWG | 4.9 | 35.2 |
| UL2517 | 4x22AWG | 5.3 | 43.4 |
| UL2517 | 5x22AWG | 5.7 | 51.1 |
| UL2517 | 6x22AWG | 6.2 | 56.2 |
| UL2517 | 7x22AWG | 6.2 | 63.0 |
| UL2517 | 8x22AWG | 6.6 | 70.9 |
| UL2517 | 9x22AWG | 7.2 | 80.9 |
| UL2517 | 10x22AWG | 7.7 | 86.3 |
| UL2517 | 2x16AWG | 6.6 | 70.4 |
| UL2517 | 3x16AWG | 7.0 | 87.9 |
| UL2517 | 4x16AWG | 7.6 | 106.0 |
| UL2517 | 5x16AWG | 8.2 | 125.2 |
| UL2517 | 6x16AWG | 9.3 | 154.8 |
| UL2517 | 7x16AWG | 9.3 | 167.7 |
| UL2517 | 8x16AWG | 10.0 | 190.8 |
| UL2517 | 9x16AWG | 11.1 | 219.8 |
| UL2517 | 10x16AWG | 11.9 | 248.0 |
| UL2517 | 11x16AWG | 12.3 | 264.8 |
| UL2517 | 12x16AWG | 12.3 | 277.6 |
| UL2517 | 13x16AWG | 12.9 | 301.2 |
| UL2517 | 14x16AWG | 12.9 | 314.1 |
| UL2517 | 15x16AWG | 13.7 | 344.4 |
| UL2517 | 16x16AWG | 13.7 | 360.3 |
| UL2517 | 17x16AWG | 14.4 | 382.5 |
| UL2517 | 18x16AWG | 14.4 | 398.3 |
| UL2517 | 19x16AWG | 14.4 | 411.2 |
| UL2517 | 11x22AWG | 8.5 | 104.0 |
| UL2517 | 12x22AWG | 8.5 | 109.3 |
| UL2517 | 13x22AWG | 9.3 | 126.2 |
| UL2517 | 14x22AWG | 9.3 | 131.5 |
| UL2517 | 15x22AWG | 9.7 | 141.4 |
| UL2517 | 16x22AWG | 9.7 | 146.7 |
| UL2517 | 17x22AWG | 10.1 | 156.0 |
| UL2517 | 18x22AWG | 10.1 | 161.4 |
| UL2517 | 19x22AWG | 10.1 | 164.5 |
| UL2517 | 2x20AWG | 5.5 | 45.6 |
| UL2517 | 3x20AWG | 5.8 | 54.6 |
| UL2517 | 4x20AWG | 6.3 | 64.1 |
| UL2517 | 5x20AWG | 6.7 | 72.9 |
| UL2517 | 6x20AWG | 7.2 | 84.2 |
| UL2517 | 7x20AWG | 7.2 | 89.3 |
| UL2517 | 8x20AWG | 7.8 | 101.7 |
| UL2517 | 9x20AWG | 8.4 | 113.6 |
| UL2517 | 10x20AWG | 9.3 | 134.2 |
| UL2517 | 11x20AWG | 9.6 | 1398 |
| UL2517 | 12x20AWG | 9.6 | 147.1 |
| UL2517 | 13x20AWG | 10.0 | 157.7 |
| UL2517 | 14x20AWG | 10.0 | 165.0 |
| UL2517 | 15x20AWG | 10.7 | 182.6 |
| UL2517 | 16x20AWG | 10.7 | 190.0 |
| UL2517 | 17x20AWG | 11.2 | 2019 |
| UL2517 | 18x20AWG | 11.2 | 209.3 |
| UL2517 | 19x20AWG | 11.2 | 214.5 |
| UL2517 | 2x18AWG | 6.0 | 55.5 |
| UL2517 | 3x18AWG | 6.3 | 67.2 |
| UL2517 | 4x18AWG | 6.8 | 80.4 |
| UL2517 | 5x18AWG | 7.4 | 93.6 |
| UL2517 | 6x18AWG | 7.9 | 106.8 |
| UL2517 | 7x18AWG | 7.9 | 116.2 |
| UL2517 | 8x18AWG | 8.5 | 132.6 |
| UL2517 | 9x18AWG | 9.7 | 158.2 |
| UL2517 | 10x18AWG | 10.5 | 179.6 |
| UL2517 | 11x18AWG | 10.8 | 188.2 |
| UL2517 | 12x18AWG | 10.8 | 198.7 |
| UL2517 | 13x18AWG | 11.3 | 213.2 |
| UL2517 | 14x18AWG | 11.3 | 223.8 |
| UL2517 | 15x18AWG | 12.0 | 246.8 |
| UL2517 | 16x18AWG | 12.0 | 257.4 |
| UL2517 | 17x18AWG | 12.6 | 272.8 |
| UL2517 | 18x18AWG | 12.6 | 283.4 |
| UL2517 | 19x18AWG | 12.6 | 291.8 |
| UL2517 | 2x26AWG | 4.6 | 29.9 |
| UL2517 | 3x26AWG | 4.8 | 32.8 |
| UL2517 | 4x26AWG | 5.1 | 36.6 |
| UL2517 | 5x26AWG | 5.5 | 42.9 |
| UL2517 | 6x26AWG | 5.9 | 48.4 |
| UL2517 | 7x26AWG | 5.9 | 49.9 |
| UL2517 | 8x26AWG | 6.2 | 55.8 |
| UL2517 | 9x26AWG | 6.7 | 63.0 |
| UL2517 | 10x26AWG | 7.1 | 68.9 |
| UL2517 | 11x26AWG | 7.3 | 70.6 |
| UL2517 | 12x26AWG | 7.3 | 73.5 |
| UL2517 | 13x26AWG | 7.6 | 78.5 |
| UL2517 | 14x26AWG | 7.6 | 81.4 |
| UL2517 | 15x26AWG | 8.0 | 87.8 |
| UL2517 | 16x26AWG | 8.0 | 90.7 |
| UL2517 | 17x26AWG | 8.4 | 96.2 |
| UL2517 | 18x26AWG | 8.4 | 99.2 |
| UL2517 | 19x26AWG | 8.4 | 100.7 |
| UL2517 | 2x24AWG | 4.9 | 33.9 |
| UL2517 | 3x24AWG | 5.1 | 38.1 |
| UL2517 | 4x24AWG | 5.5 | 44.4 |
| UL2517 | 5x24AWG | 5.8 | 50.0 |
| UL2517 | 6x24AWG | 6.3 | 57.1 |
| UL2517 | 7x24AWG | 6.3 | 59.2 |
| UL2517 | 8x24AWG | 6.7 | 66.9 |
| UL2517 | 9x24AWG | 7.2 | 74.8 |
| UL2517 | 10x24AWG | 7.6 | 81.9 |
| UL2517 | 11x24AWG | 7.8 | 84.7 |
| UL2517 | 12x24AWG | 7.8 | 88.6 |
| UL2517 | 13x24AWG | 8.2 | 94.8 |
| UL2517 | 14x24AWG | 8.2 | 98.7 |
| UL2517 | 15x24AWG | 8.6 | 106.2 |
| UL2517 | 16x24AWG | 8.6 | 110.2 |
| UL2517 | 17x24AWG | 9.4 | 126.4 |
| UL2517 | 18x24AWG | 9.4 | 130.3 |
| UL2517 | 19x24AWG | 9.4 | 132.4 |
| UL2517 | 2x22AWG | 5.2 | 39.3 |
| UL2517 | 3x22AWG | 5.4 | 44.3 |
| UL2517 | 4x22AWG | 5.8 | 53.3 |
| UL2517 | 5x22AWG | 6.2 | 59.8 |
| UL2517 | 6x22AWG | 6.7 | 68.6 |
| UL2517 | 7x22AWG | 6.7 | 71.8 |
| UL2517 | 8x22AWG | 7.2 | 81.4 |
| UL2517 | 9x22AWG | 7.8 | 91.2 |
| UL2517 | 10x22AWG | 8.2 | 100.8 |
Certifications Of UL2517
-
Procese de producție ale cablului UL
JOCA produce fire UL folosind un flux de lucru complet automatizat. Ciclul sincronizează desenul și eșuarea cuprului cu extrudarea precisă din PVC sau XLPE. În loc să așteptăm verificări de post-producție, folosim monitorizare continuă în linie folosind indicatori de diametru laser și teste de scântei pentru a detecta instantaneu defectele. Pentru variantele cu mai multe nuclee, linia gestionează cablarea, ecranarea și mantaua conform specificațiilor exacte. Înainte de expediere, fiecare lot se confruntă cu inspecții electrice și mecanice finale pentru a verifica conformitatea deplină cu standardele UL.
Ambalare pentru expediere
Pentru a satisface diverse nevoi de transport, există multe metode de ambalare care pot fi utilizate.
Ai mai multe întrebări?
Q: Primary Application?
A: Internal Wiring. Best for cramped, high-heat devices. 105°C rating handles thermal buildup better than standard 80°C wire.
Q: UL2517 vs. UL2464?
A: Temperature Difference.
UL2464 = 80°C (Standard).
UL2517 = 105°C (High Temp). Use UL2517 for medical or industrial instruments.
Î: Opțiuni de ecranare?
A: Optional. Foil + Braid shield available. Essential for blocking EMI noise in data signals.
Q: Flame Rating?
A: VW-1 Verificat. Self-extinguishing insulation. Stops fire propagation in the chassis.
Q: Voltage Limit?
A: 300V. Perfect for 24V DC logic, sensors, and control lines. Not for mains power.
Q: Conductor Type?
A: Tinned Copper. Resists corrosion (“black copper”). Solders faster than bare copper.
Q: Is it Flexible?
A: Static Flex. Good for installation routing. Not designed for continuous robotic motion.
Q: Custom Specs?
A: Da. Range: 30 AWG – 2 AWG. Custom colors and core counts available upon request.